A brand-new kind of battery was developed by engineers that combines two exciting battery sub-fields into a single battery. The battery is a silicon all-solid-state battery since it utilizes both a solid state electrolyte and an all-silicon anode. The new battery is...
The car engine may not start fully if the alternator is faulty or malfunctioning. Batteries that deserve to be known in the form of informative information will not be charged. The reason is, the alternator is actually a small part but has a big function. This is why the alternator isn’t charging battery.
It is this component of the car known as alternator amperage or dynamo, which plays a very important role. This unit serves to convert mechanical energy into electricity or alternating current. The results of this work are then used to recharge the battery.
Almost all electrical and engine components require an alternator such as engine cooling fans, fuel injection system components, power steering, lights and wipers. The alternator will power all of these systems while reducing battery performance.
Without a standard running alternator, a car battery will last less than 30 minutes. After the battery runs out, your car will crash because some of the above components are not getting good power.
Causes of the Alternator Not Charging the Battery
The alternator is the part of the car engine that functions as an electric current generator. This is for all the components in the car that are responsible for supplying power to the battery, so if the alternator is not working, the battery will not be good. Here are some reasons why the alternator won’t charge:
Drive Belt Components on Alternator Loose
The machine doesn’t care if you try to charge the phone and insert a loose or tight charger into the hole without accidentally double-checking it. The phone won’t be fully charged automatically until tomorrow. As well as the function of the drive belt on the alternator.
If the drive belt on your car’s alternator is loose, the amperage dynamo may not be fully charged, even though its function is very important or important in starting the engine’s performance. The best solution is to break the tension of the drive belt.
The Charging Part or Circuit Ground Battery is Damaged
It has been explained that charging the battery from the alternator produces current to work like charging a cell phone battery. Failure of the charging connection or battery ground circuit is one of the reasons the alternator does not charge.
The solution is to re-check all the cable connections in your car, and of course the connection to the battery. Then clean and replace the damaged components. This is because the alternator is an important component in the ignition of the engine that generates an electric shock from it.
Broken Alternator Brushes Component
As the name implies, the brush is definitely a brush that goes to the alternator component. It works like charcoal to produce a flammable flame, but it also occurs in car engines. These brushes or brushes are in close contact with the rotor coils because the alternator is not charged.
When the brushes fail, the flow connections in the rotor coils turn off automatically, causing the alternator battery to not charge. How to charge, how to overcome or a solution if the connection breaks You need to replace the brush or brush on the alternator component.
Main Tool Rotor Coil on Alternator Fault
As explained above, the performance of the rotor coil is one of the main keys of an alternator or dynamo amplifier to charge and supply power to the battery. If damaged, the main components of the battery will not charge properly. The rotor coil acts as a magnetic field.
Therefore, the rotor coil acts as a loop to supply the electric coil from the magnetic field. One solution that can make recharging work properly is to replace the rotor coil and clean the amperage armature for routine maintenance.
The four points above are the best assumptions in most ampere dynamo cases. The points above are not a barrier to deny that the cause of the alternator is damaged is also likely, check your car regularly to be sure.
Characteristics of a Broken Car Alternator
Before deciding whether the cause of your car’s problem is a faulty alternator, the features of a faulty car alternator can be used as an indicator to assess the problem with your car. Some of the features of a broken car alternator are those that need to be replaced and repaired:
There is a burning smell in the engine
A faulty car alternator can be recognized by its smell, which can feel like it’s burning even in the car’s cabin. If you smell something like that, please immediately check the condition of the engine, especially the amperage dynamo or alternator.
If you check it too late, it will not be good for your car. Prepare an umbrella before it rains, it is safe to avoid this kind of situation, you should check your machine from time to time. Performing regular car tune-ups requires care not only for the skin of the car.
Car Lights Go Out Without Owner’s Knowledge
Suddenly the car’s headlights seem dim, which is a sign that the alternator is not working properly. For those of you who are automotive lovers, you should know that there is a special relationship between the brightness of the battery and the car’s lights, so the lights will dim if the electric current is good.
This feature is the most basic and can be seen with the naked eye. But usually the lamp connection must be connected to the battery, so the battery often malfunctions. This is not easy and you still need to check all components of flow to the car battery.
The Light Indicator on the Car Dashboard Turns On
This is a very easily recognizable feature because the function of the image icon on the car dashboard is a planned notification of the car design when an error occurs in the car battery charging. As a result, it may be that the alternator feature is not working properly.
In fact, there is a close relationship between the armature amperage and the current in the battery. That way, if the alternator in your car is not being used properly, the battery indicator will automatically light up as a notification that there is a problem with the battery and possibly the alternator.
Using these characteristics, the question arises of how many amperes the car alternator actually has. This is because they all have a dose depending on the battery, as the alternator is not fully charged due to the close relationship between the two.